Cat.5e F/UTP PVC, LSZH, PE 4x2x0,48
APPLICATION
Multicore and symmetrical twisted pair cable for digital communications:
- Type Cat. 5e F/UTP 4x2x0,48 is designed for structured cabling networks with single laying inside buildings, constructions, and equipment. This cable type can operate at frequencies up to 100 MHz in conditions of increased electromagnetic action;
- Type Cat. 5e F/UTP 4x2x0,48 LSZH is designed for structured cabling networks with single laying and laying in bundles inside buildings, constructions, and equipment. This cable type can operate at frequencies up to 100 MHz in conditions of increased electromagnetic action and where low smoke emission is required;
- Type Cat. 5e F/UTP 4x2x0,48PE is designed for structured cabling networks with external laying along the walls of buildings, constructions, mines, and collectors. This cable type can operate at frequencies up to 100 MHz in conditions of increased electromagnetic action.
CABLE STRUCTURE
• Conductor: Copper wire 0,48 mm
• Insulation: HDPE in compliance with TIA 568 insulation colour coding
• Screen: Al-Pet tape min. 100% coverage
• A tinned copper drain wire, Ø 26AWG
• Al-Pet tape min. 100% coverage
• Sheath:
LSZH/LS0H RAL 2003 Orange
PVC RAL 7001 Grey
PE RAL 9011 Black
STANDARDS
ISO/IEC 11801-1, IEC 61156-5
EN 50288-2-1
ANSI EIA/TIA 568.2-D
SPECIFICATIONS
Temperature range: | |
• fixed | -20°C…+60°C |
• flexing | 0°C…+50°C |
Bending radius: | |
• fixed | min. 4 x D |
• flexing | min. 8 x D |
Tensile strength | max. 85 N |
Crushing strength | min. 1000 N/10 cm |
Impact strength | min. 10 impacts |
Conductor resistance | max. 96 Ω/km |
Resistance imbalance | max. 2% |
Insulation resistance | min. 5000 MΩ x m |
Capacitance | max. 56 pF/m |
Capacity imbalance | max. 1600 pF/km |
Velocity of propagation | 67-69% |
Propagation delay | max. 537 ns/100 m |
Signal delay | max. 45 ns/100 m |
Test voltage | 1000 V |
Operating voltage | max. 72 V |